CARBON CLEANER

PROPERTIES: Energetic degreaser specifically for use in ULTRASOUND machines, unique in its class as it consists of four components perfectly mixed into one that manages to clean the most problematic parts such as aluminium without attacking it in any way or even darkening it as happens with current products to which a protective acid must be added to avoid damaging metals such as aluminium. The level of cleaning that is achieved is excellent, far above current products and with the application of a single product. It removes burnt grease and oil, calcareous maceration, carbon, serous oxidation, incrusted concentrations of burnt-on deposits produced by bad combustion and, in general, all types of dirt that are usually found on engine parts and various types of machinery.
APPLICATIONS: It is specially formulated for its application in ultrasonic cleaning machines, (thus minimising the disadvantages of using solvent-based products, flammability, toxicity, suffocating odours) to decarbonise and clean all types of dirt produced by the combustion of petroleum-based fuels in; Injectors, Manifolds, E.G.R. Valves, Turbos, Cylinder Heads, Pistons, Segments, Particulate Filters (D.P.F.), Aluminium and metallic casings, plastics, rubbers, sleeves and parts filters (D.P.F.), Turbos, Cylinder Heads, Pistons, Segments, Particulate Filters (D.P.F.), Aluminium and metallic casings, plastics, rubbers, sleeves and in general all types of non-electronic parts that carry this type of dirt.
FOR CLEANING WITH ULTRASOUND MACHINES: For ultrasonic cleaning machines it is recommended to start with a low dilution (from 2% to 5%) and add more product if necessary until the right amount is found for the dirt to be treated, although this dilution is usually sufficient for cleaning the most problematic parts mentioned above, without damaging or attacking metals such as: - Stainless steel, aluminium, copper, iron, metal-brass, hard plastics, sleeves, etc. The working time of the machines is shortened, as the product is more effective, the working time of the machine is shorter, and in most cases 30 minutes is sufficient. If the part to be cleaned has excessive dirt, it is advisable to lighten it for the good of the liquid and the machine. 1 litre containers in pure form are sufficient for 25 litres of water.