LIMPIADOR FILTRO DE PARTICULAS
Excellent product to clean the DPF, saving its replacement even with high saturation values. WHAT IS YOUR FUNCTION? - Decompose the saturation of the DPF. - Clean and remove all dirt once it has been decomposed. - Avoid changing the DPF even with saturations of 80%. - Reset the DPF pressure values. DOSE - 1 liter activator for the decomposition, cleaning and elimination of carbonaceous residues that cause its saturation. - Neutralizer of 0.5 liters that removes the active substances of the activator in the filter once it is clean. Thus leaving the system ready for next optimal regenerations. APP. * Disassembling the DPF. - With the filter upside down, the activator is added, in the direction of the gases, leaving the product inside for a minimum time of 40 min. - Once the activator has been applied, remove the product and use the same process with the Protector. - Repeat the operation several times to achieve the maximum effect of both products. * DPF gun. - Remove the landa probe. - Pour 0.5 liters of the activator into the spray gun bottle and apply through the landa probe hole, then wait 15 min. - Pour the remaining 0.5 liters of the activator and reapply, waiting after 40 minutes for the product to act. - Once the cleaning time has elapsed, pour the 0.5 liters of the protector into the gun and carry out the same operation.