RADIATOR CLEANER TRUCK

Its excellent formula cleans, descales and removes traces of grease or oil from the entire cooling circuit.

WHAT IS ITS FUNCTION?

- It eliminates the emulsion of the oil with the coolant/antifreeze in the circuit when the cylinder head gasket or cooler breaks.

- It cleans without disassembling, removing possible sediments in the circuit.

- Prepares the circuit for the incorporation of the new coolant/antifreeze, improving the thermal transmission of temperature in the circuit.

DOSAGE

- A dose of 400ml can treat up to 10 litres of coolant/antifreeze.

APPLICATION

- Make sure the coolant/antifreeze level is below the spill level.

- Pour into the coolant/antifreeze tank.

- Start the car and run at high idle speed for at least 10 minutes.

- Once the circulation and cleaning time in the circuit is over, open the engine block and radiator drain.

- Drain the circuit with water until the water outlet is completely clean.

- Close all drains and refill the circuit with Proquisur coolant/antifreeze.