SEALS AND REFILLS
Puncture repair sealant.
- We recommend raising the vehicle and placing the valve in the lowest possible position.
- Remove the valve core (which is the inner part of the valve) with the plug provided. Allow all the air to escape.
- Fit the canister onto the valve, using the adapters if necessary. Insert the contents of the container into the tyre.
- Connect a compressor to the tyre valve and apply air to clean the valve and check that there is no product residue.
- Insert the valve core, and apply 500 g more than the pressure recommended by the manufacturer to the tyre.
- If it is still embedded, locate the object that caused the puncture and remove it from the tyre, then use the vehicle with caution, check the pressure after approx. 2 km (1.2 miles).
- Check the tyre pressure again after approx. 10 km. In some cases, depending on the damage caused to the tyre, the product can make a permanent repair, in case of loss of pressure, contact a specialist workshop.
- In case of vibrations, the product must be removed from the tyre. Clean with water.